Software > DboxBootManager

DboxBootManager

•	You will need a Null Modem Serial Cable

•	You will either need a Cross Over Network Cable or if you use a router/hub/switch a straight network cable.

•	DBox Boot Manager is only in German and can be downloaded here.

•	The PPCBoot Files are from here

•	Use a IP in the DBoxII IP field that is in the range of your Network Cards IP

•	Click on Utilities if you want to flash a Image. The software does not like long Directory names so the best is to safe any Image that you want to flash in a c:/images

1.	PLEASE IGNORE "pinging failed" as this is normal !!!!!

•	If you want to get your Box into Debug please follow the attached Picture and then click on start and turn on the DBox

HINT:

If you have any Problems doing so please press the arrow up key on the dbox for about 2-3 seconds whilst the box boots up. This starts the Memorytest and gives the PC a bit more time to find the network card. You will need a serial connection in this case to the box and then Enter boot net at the Prompt in the Com Terminal Window.

BACKUP OF BETANOVA

EXTRACT UCODES/CAM-ALHA.BIN

1st open the Backup of your original Betanova Software and extract with this software the ucodes etc.

2nd is just an option to get the ucode.bin from the dmx.so